No one enjoys plumbing problems, and dealing with a failed water pump can be particularly challenging. However, with the right knowledge and a bit of elbow grease, you can get the job done. As experts in water pump repairs, we’re here to provide you with these practical steps on how to successfully fix your submersible water pump.
Identifying the Problem
The first step in fixing a failed water pump is to find out exactly what the issue is. Common water pump failure symptoms include power overload, clogged pipes or debris, blocked impellers, broken seals or switch failures. Once you’ve determined the cause, you can move on and start making repairs.
Gather Tools and Materials
Before you start on repair work, you’ll naturally need to gather the necessary tools and materials. These generally include a multimeter device, screwdrivers, wrenches and any replacement parts that might be needed, such as seals and switches. Having these items to hand before you get started will save you time during the repair process.
Testing Power Flow
After identifying what caused your submersible pump to break down, it’s time to test whether there’s an adequate power flow going into your unit. Use a multimeter device to see if there’s enough voltage coming from your home’s electrical source.
Making Repairs
Depending on what is causing your water pump to fail, there are a few ways to fix the issue. For example, resetting the circuit breaker should be all that’s needed if your unit has been overloaded with power due to an electrical surge. If clogs or debris are causing problems, then a removal job should do the trick.
Disassemble and Clean
After making any repairs, you must disassemble and clean your submersible water pump. This is an essential step in the repair process, as it allows you to check for any further damage or corrosion that may have occurred whilst you were performing maintenance. Clean all parts thoroughly with a damp cloth before putting them back together. Check each connection point before turning on the power supply and testing your repaired unit.
Testing
Finally, you should test your newly repaired pump for functionality. Make sure the power is on, then turn on the tap or valve connected to the unit. If everything has been put back together correctly, you should hear a steady flow of water. If not, double check all connections before trying again.
Need Help with Water Pump Repairs?
If you don’t feel capable of fixing your failed water pump yourself and want to leave it to the professionals, get in touch with H2O Flowtech. Our team of water pump repair technicians will diagnose the problem and perform the necessary repairs with accuracy and efficiency.
Comentários